Preparation.
General.
New plasterboard.
Ensure all surfaces are are clean, dry and free from flaking/defective material, oil and grease.
For previously oil painted gloss surfaces, lightly abrade to provide a key, wash down using a damp sponge remove loose contaminates and allow to dry.
Any surfaces which are powdery in nature apply one coat of stabilising solution applied in accordance with manufactures instructions. Note : When dry any areas which display a gloss finish should be lightly abraded before progressing.
Surfaces of high porosity apply one coat of General Purpose Sealer in accordance with manufactures instructions.
Textured Base coats and Finishes should be mixed and applied in accordance with manufactures instructions.
For further information and product advice: https://www.artexltd.com